Inconel 625 Round Bars are made from a nickel-chromium-molybdenum alloy designated UNS N06625. Molybdenum and niobium strengthen the alloy and support resistance to pitting, crevice corrosion and high-temperature service. These properties make it suitable for marine equipment, chemical processing components and demanding industrial applications.
Metalloy Steel supplies Inconel 625 Round Bars in India for machining, fabrication and engineering requirements. Buyers can enquire about ASTM B446 UNS N06625 Round Bars by specifying the required diameter, length, quantity and material condition to check availability and request a quotation.
Complete mechanical, dimensional, and standard parameters for ASTM B446 UNS N06625 round bars and rods.
| Specification Parameter | Details |
|---|---|
| Product Name | Inconel 625 Round Bars |
| Material Type | Nickel-Chromium-Molybdenum-Niobium Alloy |
| Common Designation | Alloy 625 |
| UNS Designation | N06625 |
| ASTM Standard | ASTM B446 |
| Werkstoff Number | 2.4856 |
| JIS Reference | NCF 625 |
| EN Material Designation | NiCr22Mo9Nb |
| Available Forms | Round bars and rods |
| Supply Condition | Annealed or other specified conditions, subject to specification and availability |
| Dimensions | Diameter and length as per requirement |
| Surface Finish | Black, bright or machined, subject to availability |
Graded chemical chemistry and physical-mechanical metrics of Inconel 625 (UNS N06625 / 2.4856).
| Standard / Designation | Reference |
|---|---|
| Alloy Name | Inconel 625 / Alloy 625 |
| UNS | N06625 |
| Werkstoff Number | 2.4856 |
| JIS Reference | NCF 625 |
| BS Reference | NA 21 |
| AFNOR Reference | NC22DNB4M |
| EN Designation | NiCr22Mo9Nb |
| GOST Reference | ХН75МБТЮ |
| Element | Chemical Symbol | Composition (%) |
|---|---|---|
| Nickel | Ni | 58.0 min |
| Chromium | Cr | 20.0–23.0 |
| Molybdenum | Mo | 8.0–10.0 |
| Niobium + Tantalum | Nb + Ta | 3.15–4.15 |
| Iron | Fe | 5.0 max |
| Carbon | C | 0.10 max |
| Manganese | Mn | 0.50 max |
| Silicon | Si | 0.50 max |
| Sulfur | S | 0.015 max |
| Phosphorus | P | 0.015 max |
| Aluminium | Al | 0.40 max |
| Titanium | Ti | 0.40 max |
| Cobalt | Co | 1.0 max |
| Property | Reference Value |
|---|---|
| Density | 8.44 g/cm³ |
| Melting Range | 1290–1350°C |
| Tensile Strength | 930 MPa (135,000 psi) |
| Yield Strength (0.2% Offset) | 517 MPa (75,000 psi) |
| Elongation | 42.5% |
For other available alloy and stainless steel grades, explore our Round Bars range.
Estimate real-time linear mass and total order weight for Inconel 625 and other industrial alloy round bars with our live 3D visualizer engine.
Inconel 625 Round Bars can be selected by material condition, finish and cutting requirements to suit component manufacturing and machining needs.
Provide a combination of strength and ductility for machining and fabrication.
Can offer higher strength through deformation, depending on the processing level and supplied specification.
Feature a smoother surface finish for applications requiring improved surface quality and machining preparation.
Supplied in specified lengths to suit component dimensions and reduce additional cutting work.
* Availability of each condition, finish and dimension should be confirmed before ordering.
Engineered for superior strength, thermal stability, and unmatched resistance to severe corrosive media.
Molybdenum and niobium strengthen the alloy matrix, allowing it to achieve high strength without requiring precipitation-hardening treatment.
The alloy offers strong resistance to pitting and crevice corrosion, particularly in chloride-containing environments.
Inconel 625 retains useful mechanical strength and oxidation resistance in many elevated-temperature applications, depending on service conditions.
The alloy can be welded using suitable procedures and filler materials, supporting the manufacture of complex components and assemblies.
Inconel 625 Round Bars are selected for components exposed to demanding corrosion, pressure and temperature conditions.
| Industry | Typical Components / Uses |
|---|---|
| Oil & Gas | Downhole components, valve parts, wellhead equipment and corrosion-resistant machined components |
| Marine Engineering | Seawater-exposed components, marine fastener parts and equipment operating in chloride-rich environments |
| Chemical Processing | Reactor components, heat exchangers, pump parts and equipment handling corrosive process media |
| Aerospace | Selected engine and exhaust components requiring high strength and thermal resistance |
| Power Generation | High-temperature fasteners, turbine-related components and heat-resistant equipment parts |
| Pollution Control | Scrubber components, flue-gas treatment equipment and parts exposed to corrosive exhaust environments |
| Offshore Engineering | Subsea equipment components and structural hardware designed for demanding marine conditions |
Metalloy Steel can discuss inspection and documentation requirements for Inconel 625 Round Bars according to the purchase specification and order scope.
Can be requested, subject to availability, to document heat-specific chemical composition and mechanical test results.
Can help verify alloy identity and distinguish UNS N06625 from other nickel alloys.
Can be specified to verify the required elemental composition.
Tensile strength, yield strength, elongation and hardness testing can be requested according to applicable requirements.
Checks bar diameter, length, surface condition and specified tolerances.
Independent inspection may be arranged with an agreed agency, subject to availability and project requirements.
Clear technical answers to frequent queries regarding Inconel 625 round bar supply, properties, and applications.
Enquiries can specify ASTM B446 and UNS N06625, along with the required diameter, length, quantity and documentation.
Inconel 625 uses molybdenum and niobium for solid-solution strengthening and improved resistance to pitting and crevice corrosion. Inconel 600 is primarily a nickel-chromium-iron alloy commonly selected for oxidation resistance and various thermal applications.
Yes. Their resistance to chloride-induced pitting and crevice corrosion makes them suitable for many marine applications. Final selection depends on seawater conditions, temperature, flow and component design.
Yes. They can be machined and welded using appropriate tools, cutting parameters and qualified procedures. Their strength and work-hardening behaviour require suitable fabrication practices.
Check tensile strength, yield strength, elongation and hardness against the required ASTM B446 grade, product condition and project specification.
Provide the required diameter, length, quantity, applicable standard, material condition, delivery location and any inspection or documentation requirements.
Contact Metalloy Steel to enquire about Inconel 625 Round Bars in India as per ASTM B446 and UNS N06625. Share your required dimensions, quantity, material condition and delivery location, along with any inspection or documentation needs, to check availability and request a quotation for your project.
Enquire Now